Overview

2-in-1 Belt & Disc Sander "Belt & disc sander has 0 to 45 degree tilting aluminum work table can be angled for miter polishing. GI belt sander tilts to work both horizontally and vertically, grinding and polishing flat and cambered surfaces. Even the Belt table tilts 90 degrees from horizontal to vertical. Quick release system ensures easy belt changes, Belt is easily adjusted with tracking knob. " Whoever said “if you’ve seen one sander you’ve seen them all”, was wrong. The General international 2-in-1 Belt/Disc Sander was built for versatility with its 0 to 45 degree tilting aluminum work table which can be adjusted for miter polishing. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, an L shaped stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. The 16-1/2 in x 4-7/8 in. belt sander tilts to work both horizontally and vertically for grinding and polishing flat surfaces. It has a 6 inch diameter Aluminum disc backing plate. This heavy duty belt sander is made with a solid cast iron base. The BD7004 Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt bed adjusts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you'll have the capacity to sand whatever you need. The sanding disc is accompanied by a sturdy cast-aluminum work table. Includes a 2 year limited warranty Solid cast iron base & housing, steel & aluminum construction, Durable tilting work table with miter gauge 6 in. diameter aluminum disc backing plate 375 W Motor, 120 V ~60Hz, No-load motor speed: 3450 RPM; Amp: 4, HP- 1/2 Miter Gauge, 6 in. peel-&-stick sanding disc, 4 in. x 36 in. Sanding belt 2-1/4 in. I.D. dust port, Includes an L-Shaped steel work stop Safety on/off switch with removable key, Quick release system ensures easy belt change ETL Certified, 37.5lbs Manufacturing facilities are certified to ISO9001 & ISO14001 International standards

Warranty and Notice

Covered by Manufacturer's Warranty

Click Here for California Proposition 65 Warning.

Return Policies

This item is covered by nutrend.com's Standard Return Policy

Return for refund within:30 days

Return for replacement within:30 days